1. Advanced all digital soft-switch inverter technology, steady output, strong network voltage fluctuation resistant ability.
2. It could pre-set the current, wire feed rate, thickness, wire diameter and voltage and inductance, the LCD displays the welding current and voltage.
3. The wire feeder adopts dual drive, it has the function of rate feedback, it use the waveform control, the welding process is steady, less splash, good welding formation.
4. It is the first one to use the DEVICENET inside the welding machine, it could connect to robot and special system, easy to achieve automatical welding
5. The parameters could be set, such as inching wire feed speed, soft start speed, gas pre-flow and gas post-flow, burn time, start current and end current and etc.
6. With great network function, it's able to realize the centralized monitoring and control, software upgrade and remote diagnosis.
7. It could continuously record the welding date, time, setting, welding current and voltage, arc breaking, short circuit, alarm and etc, convenient to record and control the quality.
8. It has 2T, 4T, Spot welding, special system modes
9. Full digital waveform control, steady performance, good consistency, it does not affect by temperature, humidity, and the component deterioration.
10. With 100 sets of storage memory.
| Welding machine specifications |
MMA/MIG315 |
MMA/MIG350 |
MMA/MIG400 |
MMA/MIG500 |
MMA/MIG630 |
| Current Range |
10A-315A |
10A-350A |
10A-400A |
10A-500A |
10A-630A |
| Thickness |
0mm-25mm |
| Wire Feed Speed |
1m/min-22m/min |
| Arc length |
from - 50% to 50% |
| Arc Force |
from -50 to 50 |
| Material type |
13 kinds |
| Wire Diameter |
0.8, 1.0, 1.2, 1.6 |
| Operation mode |
2T, 4T, S2T, S4T, Spot, JOB |
| Start current(HotI) |
0% to 200% |
| End Current (EndI) |
0% to 200% |
| Start time (Hott, s) |
0.1s to 15s |
| End Current Time (Endt) |
0.1s to 15s |
| Burning time (Burn) |
0% to 20% |
| Spot time (Sptt) |
0.01s to 2s |
Audited Supplier 
){kind=link}